Posts for tag: orthodontic treatment
If you're into social media, you might have run across the idea that there's nothing to straightening your teeth. According to some SM influencers, you can even do it yourself with a few rubber bands. But the truth is, the mechanics of moving teeth are much more complex—and taking orthodontics into your own hands can cause extensive dental damage.
In reality, all bite problems (malocclusions) require the advanced knowledge and expertise of an orthodontist to correct them safely and effectively. Some, in fact, may require other devices along with braces or clear aligners to achieve the desired outcome for a particular malocclusion.
Here are a few of those additional tools an orthodontist may use and why they may be needed.
Headgear. Some malocclusions result not just from misaligned teeth, but problems with jaw or facial structure development. To accommodate additional factors like this, an orthodontist may include headgear during treatment, usually a strap running around the back of a patient's head or neck and attached in the front to brackets bonded to the teeth (usually the molars). Wearing this headgear for several hours a day can improve jaw and facial development.
Elastics. Unlike basic rubber bands DIYers might use to move their teeth (often with damaging results), elastics are specialized bands designed for targeted tooth movement. They're needed for bite problems that require moving some teeth and not moving others. As such, elastics can be applied in conjunction with braces to perform either intended task—move or prevent movement for specific teeth.
Anchorage. One of the tools often used with elastics for targeted tooth movement are temporary anchorage devices (TADs). These are typically tiny screws imbedded into the jawbone a short distance from fixed braces. An elastic band connected to the braces at a specific point is then attached to the TAD, which serves as an anchor point for the elastic.
These and other devices can help orthodontists achieve a successful correction for certain individual bite problems. And unlike the DIY methods touted on the Internet, these additional tools help them do it safely.
If you would like more information on straightening teeth through orthodontics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”
You can't correct a poor bite with braces or clear aligners overnight: Even the most cut-and-dried case can still require a few years to move teeth where they should be. It's a welcome relief, then, when you're finally done with braces or aligner trays.
That doesn't mean, however, that you're finished with orthodontic treatment. You now move into the next phase—protecting your new smile that took so much to gain. At least for a couple of more years you'll need to regularly wear an orthodontic retainer.
The name of this custom-made device explains its purpose: to keep or “retain” your teeth in their new, modified positions. This is necessary because the same mechanism that allows us to move teeth in the first place can work in reverse.
That mechanism centers around a tough but elastic tissue called the periodontal ligament. Although it primarily holds teeth in place, the ligament also allows for tiny, gradual tooth movement in response to mouth changes. Braces or aligner trays take advantage of this ability by exerting pressure on the teeth in the direction of intended movement. The periodontal ligament and nature do the rest.
But once we relieve the pressure when we remove the braces or aligners, a kind of “muscle memory” in the ligament can come into play, causing the teeth to move back to where they originally were. If we don't inhibit this reaction, all the time and effort put into orthodontic treatment can be lost.
Retainers, either the removable type or one fixed in place behind the teeth, gently “push” or “pull” against the teeth (depending on which type) just enough to halt any reversing movement. Initially, a patient will need to wear their retainer around the clock. After a while, wear time can be reduced to just a few hours a day, usually during sleep-time.
Most younger patients will only need to wear a retainer for a few years. Adults who undergo teeth-straightening later in life, however, may need to wear a retainer indefinitely. Even so, a few hours of wear every day is a small price to pay to protect your beautiful straightened smile.
If you would like more information on orthodontic retainers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Importance of Orthodontic Retainers.”
Before we begin correcting a malocclusion (poor dental bite), we need to ask a few questions: How extensive is the malocclusion? How far must we move the teeth to correct it? How might the patient's jaw size impact treatment?
Answering these and other questions help us develop an effective treatment plan. And depending on the answers, we might need to look at other procedures before we install braces—like removing one or more of the teeth.
This isn't a subject to approach lightly: All teeth play an important role in dental function and smile appearance, and ordinarily we want to preserve teeth, not remove them. Sometimes, however, it may be a necessary action to achieve our goal of an improved dental bite.
For example, it might be necessary for correcting a malocclusion caused by severe teeth crowding. This occurs when one or both of the jaws hasn't grown to a sufficient size to accommodate all of the teeth erupting on it. As a result, some of the teeth could come in out of their proper alignment.
If caught early before puberty, we may be able to use other techniques to alleviate crowding, like a device called a palatal expander that influences an upper jaw to widen as it grows. If successful, it could provide later teeth more room to erupt in their proper positions.
But even if additional jaw growth occurs, it may not be enough to avoid a malocclusion or treatment with braces. Alleviating further crowding by removing teeth in little noticed areas could help with subsequent orthodontics.
Removing teeth may also be the answer for other problems like an impacted tooth, in which the tooth has not fully erupted and remains submerged in the gums. It's sometimes possible to use a technique to “pull” the tooth down where it should be; but again, that will still require jaw space that may not be available. The more effective course might be to remove the impacted tooth.
Whether or not tooth extraction will be needed can depend on a thorough orthodontic evaluation and full consideration of all the available options. Even though the ideal situation is to correct a bite with all teeth present and accounted for, it may be for the better good to sacrifice some.
If you would like more information on orthodontic techniques, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removing Teeth for Orthodontic Treatment.”
Each year, millions of children and teenagers wear braces or clear aligners to straighten a crooked smile. But there may be a way to treat some of these bite problems and avoid braces—by intercepting the problem at an earlier age.
This can often be done if the bite problem stems from abnormal jaw development rather than misaligned teeth. An example of this occurs when the upper jaw growth outpaces the lower jaw, causing the upper teeth to protrude beyond the lower teeth. Aside from the effect on appearance, protruding front upper teeth may extend beyond the protection of the lip and be more prone to injury.
A device called a Herbst appliance could prevent this from happening. The top of the device has two hinged metal tubes that connect to elastic bands bonded to the back teeth on both sides of the upper jaw. The bottom also has tubes affixed in the same way to the bottom teeth, except they're slightly smaller and fit within the upper tubes.
The lower tubes sliding within the upper tubes produces slight pressure against the lower jaw to ease it forward. This gradually influences the lower jaw to grow at a pace equal with the upper jaw to decrease the chances of poor bite development. Unlike other corrective methods, the Herbst appliance fixed in place and out of the way won't interfere with sports or other physical activities.
An installed Herbst appliance may change a patient's sensations during swallowing, eating or speaking, but most children adapt to the changes within a few days. And, because the device can create challenges for keeping the back teeth clean, many dentists recommend adding a fluoride rinse to daily brushing and flossing as an added boost against tooth decay.
The Herbst appliance is most effective during the period of most rapid physical growth between the ages of 11 and 14, but if the teeth are already beginning to protrude it can be undertaken as early as 8 or 9. Either way, this important orthodontic tool could help address a complicated bite problem and reduce the need for more costly orthodontic treatment later on.
If you would like more information on early interventions for poor bites, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “The Herbst Appliance.”
Do-It-Yourself (DIY) is a deeply held American trait for building, renovating or repairing things without the services of a professional. The Internet has only made this tradition easier: There are scores of videos showing people how to do things on their own like build a deck, fix a dryer or bake an award-winning soufflé.
But some things are best left to the experts, which if you tried to do using too little knowledge or a lot less training could turn out disastrous. A prime example is becoming your own orthodontist and using dubious home methods to straighten your teeth. If that sounds preposterous, the American Association of Orthodontists recently reported it does happen, with one in ten of their members saying they have treated patients who attempted their own smile-straightening projects.
Often found on social media, these methods usually involve household items like rubber bands or dental floss to straighten teeth. Like other forms of DIY, the object is to save money. In the end, though, these self-orthodontic methods could result in dental damage that could cost much more to repair (if indeed it's repairable) than what might have been spent with professional orthodontics in the first place.
Utilizing extensive training, experience and artistry, orthodontists work with the mouth's natural ability to move teeth in a precise manner for a planned outcome. They carefully consider each individual patient's jaw and facial structures, along with the severity and complexity of their bite problem, as they design and implement a treatment plan involving braces, clear aligners or other orthodontic appliances.
A rigged homemade device to move teeth can't adequately take these factors into account. As a result, you may be risking permanent gum and bone damage—and you may even lose teeth in the process. Even if repairable, such damage could require oral surgery, cosmetic dentistry or more extensive orthodontic procedures.
In the end, you're highly unlikely to be successful at DIY orthodontics—and you won't save any money. A healthy and beautiful smile is well worth the cost of professional, high-quality orthodontics.